10 Best Tile Saw Blades in 2024: The Definitive Guide

Choosing the right blade for the right material is not an easy task. Moreover, there is a vast array of tile saw blades available around. We ease your worries. It will be wise for you if you know some basic facts about tile saw blades. Our reviews will assist you in this matter. What is needed is your undivided attention while going through the reviews. I think it will help you to find out best title saw blades.

Best Tile Saw Blades – Reviews

1. QEP 6-1008BW Wet Tile Saw Diamond Blade

The 6-1008BW from QEP’s Black Widow Series is determined to offer you the best service possible with its versatile performance on porcelain, granite, ceramic, marble. This high-quality blade brings the perfection of the jobs that necessitate quick and chip-free cutting. It cuts fast on hard materials.

It is also flawless on porcelain and marble materials. Its high-quality steel with 7mm, diamond-wanted high-rim ensures less chipping and a cleaner cut. Its 5\8inch arbor suits most brands of wet tile saws. This micro-segmented diamond blade reduces wobbling and chipping and therefore enhances its durability.

Moreover, these unique diamond-shaped laser cutouts keep your blade cooler and ensure superior performance.

It is an inexpensive one. But with its high-speed, fast-cutting, longer life it can outshine the most expensive ones.

Pros:

• Versatile
• Minimum chipping
• Quick and clean cut
• Durable

Cons:

• Get dull quickly if cut hard stones
• Flexes near the tiles

2. MK Diamond 158434 Tile Saw Blade

No other tile saw blade is as good as MK Diamonds MK 225 Hot Dog blade to cut through dense tiles like porcelain and hard granite. What co-operates you to cut through hard vitreous tile is its thinness. This blade is also good with slate limestone, marble, bluestone, and hard quartz. But it is not for use on metal, plastics, or any other non-masonry.

Its thin rim design is to prevent chipping. It doesn’t wobble and doesn’t get rust also. What is more is that it features cooling slots that guarantee straight cutting of dense, and hard materials.

This blade not only ensures precise cuts but also enhances the cutting capacity of your saw.

Pros:

• Thin cuts
• Cooling slots to get straight cuts
• Thin rim prevents chipping
• Best for porcelain tile

Cons:

• Short lifespan
• Not for glass tiles

3. DEWALT DW4764 Diamond Blade

DW4764 XP4 Tile Blade is one of DEWALT’s large-scale productions. This gigantic tile blade allows quick, free, low heat, and straight cutting in all types of tiles. On top of that, its continuous rim design renders chip-free cutting. This blade is for materials like granite, slate, porcelain, etc. Because of its mammoth size, it costs you much. Its diamond matrix ensures 4tims longer life while laser cut expansion slots eliminate blade warping due to heat build-up.

It is a very good blade. But, sometimes it receives bad reviews from some users. What you need to get 100 %from it is to condition it first by cutting it into a cement block. This process helps the blade cut better all the time after.

Though it costs some extra, it worths paying the extra. Because it is relatively a long-lasting blade.

Pros:

• Can cut tile in a very brief time
• Last a long time
• Suits many types of materials

Cons:

• Only for wet applications
• Expensive

4. QEP 6-7006GLQ Tile Diamond Blade

QEP 6-7006 GLQ is being manufactured, especially to make a perfect cut on glass tiles. If you don’t use the right blade made for glass tiles, all your effort will go in vain. That’s why I suggest you buy this upgraded blade version from QEP while cutting glass tile. You can also cut materials like ceramic, porcelain, marble, and granite with this blade. Apart from this, it is made for use with a wet tile saw, and its 5\8 in arbor suits most brands of wet tile saws. It includes a 7mm continuous hi-rim, and 7mm diamond-coated cutting edge.

It does what it says. You can enjoy clean and accurate cuts on glass with minimal chipping. Moreover, you won’t experience any overheating and internal sparking while cutting.

Pros:

• High RPM
• Can cut glass tile

Cons:

• Not for strong materials
• And only for wet application

5. Piranha Continuous Rim Wet/Dry Diamond Blades

With a 10-mm high diamond segment, Piranha 10inch has undoubtedly become an apt tile blade to use on a wide variety of materials like tile, porcelain tile, granite, marble, slate, terrazzo, and anything similar. Its specs are 10″ diameter x-060 thick with a standard 5\8″ arbor whole, which makes it fit for 99% of all tile saws, and the core is made from heat-treated hi-speed steel, which guarantees its firm stand against the challenge of high production demand. The thin rim extends its cutting speed and blade life and contributes to making you get the first-class cut, apart from this. The 10mm tall diamond rim maximizes cutting life and lowers the cost per cut.

Last but not the least, it offers a 100% lifetime warranty and free of charge replacement, if you find any material defect in it.

What is disappointing about it, is that some customers end up with massive chipping while they were going to do some 45-degree cuts.

Pros:

• Use on a wide variety of materials
• Fast class cut
• Thin rim to extend cutting speed and life
• Low cost per cut
• Outstanding warranty offers

Cons:

• Often cause wobbling and noise
• Fast speed may cause chipping
• Need dressing frequently

6. Bosch DB743S Diamond Blade

If you want the best possible advantages concerning your costs, the Bosch DB7435 blade will be your only option. It is an inexpensive one yet gives top-notch performance and accomplishments on ceramic and slate tiles. You also get clean cuts in most tile materials. Its arbor is 5\8″. Its tensioned steel core ensures stability and rigidity during cutting. It also helps extend the life of your saw. It is also a user-friendly blade. But, you may end up with minor chipping if you want too fast. But it is not that much.

Pros:

• Low-price
• Clean cut
• Great for ceramic and slate tiles

Cons:

• No warranty
• Need much time to cut hard stones

7. SKIL 79510C 7-Inch Turbo Rim Diamond Blade

If you want a more polished and smooth cutting of masonry, you can depend on SKIL 79510C. It is planned to work on small DIY projects. You can cut concrete, brick, cinder block easily. Its long life is one of many good reasons why woodworkers love to have it. Its cutting-edge rim ensures its durability. You get chip-free smooth cut and can use for cut-off saws also.

It features a diamond matrix with improved colling vents, which makes it 2x faster cuts. These features also help offer 50x longer life than any standard abrasive blade.

But you may face a lot of dust as it doesn’t mean to use water. But this blade itself an excellent one. This blade cuts like butter. It can go right through the blocks like a wood blade cuts wood.

Pros:

• Longer life
• Can be used for cut-off saws
• Give polished and smooth cut on masonry

Cons:

• Slightly expensive
• For dry projects only

8. DEWALT DW4725 Diamond Blade

The price can’t limit or enhance performance. It is quality that defines how things will perform. Right? And it is true about DEWALT’s products.

DEWALT keeps mesmerizing woodworkers with its top-quality products and their performance, and the DeWalt Dw4725 blade is no exception. This is a high quality yet can achieve at a moderate price. This blade features a satin nickel finish to ensure it’s a long life. The diamond rim confirms faster and smoother cuts even in years-old masonry but doesn’t gather much dust. Thanks to its thinner kerf. Along with minimizing dust, it also increases speed. It is a well-made blade and also easy to use. You can also do some small grinding on the edges.

It will be a great deal for you.

Pros:

• High quality
• Reasonable price
• Durable
• Less dust
• Faster and smoother cut

Cons:

• But for masonry only

9. QEP 6-7001Q 7″ Diamond Blade

QEP 6-7001Q blade is one of the cheapest QEP blades. But it performs really well. I have used it. It is good so far. It can be your go-to blade. Okay, let me cut it out.

With diamond rim technology, the QEP 6-7001Q blade assures wobble-free smooth, and precise cuts. On top of that, it includes a diamond-coated rim to enhance its cutting power. Fast RPM convinces consumers to buy it, and it is quite unbelievable to have such a quick spin for a blade of this size. What ends up making your cutting so more elegant and smooth is its 8730 rotations per minute. Materials like porcelain, ceramic, granite, and marble can be cut through with it. It is designed to work on wet applications only.

Pros:

• Affordable
• High RPM

Cons:

• Wet application
• Not for strong materials

10. GoYonder 4.5 Inch Diamond Saw Blade

Go Yonder 4.5″ blade is not large. Its tiny size makes it portable. It’s equally capable of working on dry and wet applications. Its X-teeth offers fast and smooth cutting. This super-thin porcelain saw blade renders chip-free cut and also can cut ceramic, granite, and other masonry materials. It’s RPM is between 8000 to 11000.

This fits both for wet and dry cutting. It is surprising actually how this thing works with such a low price. You can easily cut 1.5-inch thick granite. I recommended it highly. Such a great tool!

Pros:

• Lightweight
• Small and portable
• Both work on the wet and dry application
• High RPM

Cons:

• Too thin

Types of Tile Saw Blades

Basically, you will find two types of tile saw blades, depending on their techniques. These types are-

• Wet tile saw blades
• Dry tile saw blades

As their name suggests, the classification came mainly from the way they cut through tiles or other materials. The exact use of the tiles saw blades depends on the project requirements, and their work procedure varies, although the primary structure remains the same.

Wet Tile Saw Blades

The wet tile saw blades are the most widely used blades you will see in tile cutting and masonry jobs. It can literally cut through any stone without the least problem. You will see the most use of wet tile saw blades with the table saw.

Also, as the name suggests, the blade needs to be used with water so that it remains wet always. Hence, when you purchase and work with a wet saw blade, make sure you have access to the water source still.

Also, wet tile saw blades enjoys one of the longest lifespans among the saw blades. It happens because the water keeps running on the edge and keeps it cool while working. Thereby, the wet tile saw blades are less prone to damage and cracks.

These saw blades are also safe to use. Firstly, the water protects them from overheating, and secondly, the edge is smoother too. Also, wet tile saw blades are suitable for large projects. Last but not least, their cutting result is softer than the rim saw blades.

Pros:

• Extended lifespan
• Handles large projects
• Remains cool for a longer period

Cons:

• Needs continuous water flow to work

Dry Tile Saw Blades

Dry tile saw blades are not meant to cut through all sorts of stones.  It has less power and is used as a handheld saw version. Hence, many people call them handheld tile saw blades too.

Since it works in a handheld position, the cutting smoothness and consistency are not up to the mark always.  Hence, the edges of the material aren’t so smooth. However, the dry tile saw blades are hugely recommended for beginners since it is easy to set up and use.

The tile saw blade with the dry feature is used mostly to cut and replace old tiles since it doesn’t ask for the premium smoothness. However, you need to clean the space since the handheld saw blades would create sawdust and messes during the work time.

Pros:

• Lightweight and easy to use
• Doesn’t need continuous water flow
• Ideal for beginners and small workshops

Cons:

• Can’t cut all kinds of tiles and stones

How to Sharpen a Tile Saw Blades

Tile saw blade naming is a confusing one since it works differently than the regular saw blades. It doesn’t cut through the material like standard saw blades. Instead, it works like a grit paper that grinds through the stones, tiles, or ceramics to cut them into pieces.

Since it works at high speed and works as a sand or grit paper, the diamonds on edge wears out sooner than the regular saw blades. Thus, you need to sharpen the tile saw blade more frequently than the other blades. It will help you from the costly replacement every time the edges become dull.

• At first, you have to make sure that the water flow or coolant is reduced. You need to see that the valve is adjusted to the half-open position.
• Now, you will have to find the right abrasive material to sharpen the saw edges. You can opt for the breeze block, grinding stone, or a dressing stick to sharpen the saw edges. You may even use a chunk of asphalt or even clay bricks for the purpose.
• Now you will have to cut through the selected abrasive material several times. Ideally speaking, it needs to be cut four to five times, at least for a better result. Finally, stop the coolant flow and saw too.  You must wait and allow the blade to stop spinning without external force gradually.
• Now carefully unplug the saw from the power saw. It is essential for safety features during the sharpening process.
• Now carefully observe the entire length of the tile saw blade diamond edges. It is suggested that you use an eye loupe. It will help you to find the glistening black dots on the edge better. Now, slowly, drag your thumbnail on the lately sharpened edge. If it feels rough, the sharpening is done correctly. A worn-out bite feels dull at hand.
• Depending on the dullness of the tile saw edges, you might need to repeat the sharpening process several times.

The dressing of the tile saw blade isn’t compelling. However, it is suggested that you wear gloved during the dressing session. It will help you operate the abrasive material better and protect you from unwanted cuts.  Also, never forget to unplug the tile saw from the power outlet to prevent accidental starting of the tile saw. It will help you dressing the saw blade with proper safety.

How to Change a Tile Saw Blade

You need to change the tile saw blade for several reasons. For instance, you might want to replace a worn-out blade for the tile saw with a new one. Another reason for changing the tile saw blade is to sharpen it.

However, it is crucial that you precisely know when to change the blade. Change the blade, if-

• During cutting sessions, the saw makes an unusual noise or vibrates excessively
• If you see visible wearing out or damage in the edges
• The steel crust of the saw edges is exposed as the diamond covering has worn out
• The cutting speed has become slower than usual

When you see any of these signs, it is time to change the tile saw blade correctly. The process includes-

• For safety reasons, unplug the tile saw from the power outlet at first before proceeding to the actual blade removal process.
• Observe the blade carefully. Generally, ¾ of the tile saw blade is hidden behind a protective cover. Also, it has a hinge that securely locks the saw with the blade.
• You will see a locking nut in the middle of the saw blade. Use an adjustable wrench to loosen the nut at first.
• After removing the locking nut, also remove the washer from its place.
• Once you have removed the nut and attached the washer from the hinge, now it is time to remove the old saw blade.  Slide the blade carefully off the attached shaft. Then take the tile saw blade from the thread.
• You will have to slide the blade towards you and not in the opposite direction.
• Once you have removed the older blade, carefully inspect the tile saw. Then slide in the new blade into the shaft. It is recommended that you clean the shaft since it might accumulate debris over time.
• When you change the old blade with a new one, check its direction for the installation. It is vital because some blades will support structure in a specific direction only.
• Finally, check that the blade has been appropriately adjusted with the shaft. Then, use the adjustable wrench to tighten the locking nut and washer into place.

When you remove the locking nut, use the wrench in the clockwise direction. And for tightening the nut, use it in the anti-clockwise direction.

Different Parts of the Tile Saw Blade

A saw blade is made of many components. These components are attached with a uniformity that looks like a single piece of the tile saw blade. However, it has different parts, each having a specific job to perform to accomplish the cuts.

The most vital parts of the tile saw blade includes the following-

Arbor Hole

When you look closely at the tile saw blade, you will see a hole right at its center. Technically, this central hole is referred to as the arbor hole of the blade. It works as a shaft to hold the saw blade with the cutting device.

The standard diameter of the 10” tile saw blade would be 5/8” in America. When you get a new tile saw blade, make sure the arbor hole or shaft fits the diameter of the saw correctly. Otherwise, your saw blade changing and installation might fail.

Core

The core refers to the part of the saw blade that circles around the arbor hole. It is mostly made of stainless steel to ensure longevity. It holds the diamond edges of the saw blade. The strength of the core actually defines the cutting capacity of the blade.

Ideally, the core has a diameter of around 6” to 8”.

Edge

The edge of the tile saw blade is covered with diamond or other non-abrasive material. It comes with the direct contact of the cutting material. Unlike other saw edges, it grinds through the stone, ceramic, or tile to perform the cuts.

The edges of a tile saw become dull soon, and so needs frequent replacement or sharpening. When you notice that the diamond plating of the edge is worn out, you need to change the blade too.

What to Consider When Choosing the Best Tile Saw Blades

Getting a blade for the tile saw is a prominent investment and crucial for your construction sites. It will determine the fastness or slowness of the cutting work. Also, it decided how smooth the tile edges will be, which is of prime importance.

If you still unsure which tile saw blade to seek for your construction sites and workshops, the following guideline on the buying factors for tile saw blades should help you.

Cutting Material

The wet tile saw blade and dry tile saw blade is designed to cut specific materials. Hence, when you decide to buy a tile saw blade, determine which material you will be cutting most frequently. When you know which material you will deal with most often, you can then choose the right blade quickly.

For instance, wet tile saw blades could cut almost all types of materials, but dry tile saw blades have limited capacity when it comes to cutting material. Hence, wet blades are preferable for professional jobs more.

Types of Cuts

You get two types of saw blades, wet and dry, for the tile saw. Each of these blades fulfills different necessities and masonry requirements.  Some tile saws, especially the electric tile saws, prohibit using the wet blades because it can cause serious injuries at times.

However, wet blades are more adept at cutting sturdy materials. So, when you cut granite or basalt tiles, using a wet tile saw is your preference. Also, if you want a smooth finish, there’s no option other than using the wet tile saw blades.

On the contrary, dry blades are made to work on old tiles, tiles replace, and cutting large chunks of tiles into smaller ones for the finishing touch.

Blade Material

You need to check the material used to construct the tile saw blade. Generally, all saw blades for tile cutting equips with diamond and other materials. The diamond acts as a covering on the edge and uses its sanding ability to sand or grit stones for cutting.

However, it is essential to note the right proportion of diamond and other materials in the blade. Ideally, the frame must be built from stainless steel. Also, the arbor and core part of the saw blade should have scratch and corrosion-resistant material.

Finally, the edge needs to have a non-abrasive material along with the diamond. Many manufacturers use carbide or tungsten with the diamond for the borders.

Speed of The Blade

The blade speed has two crucial roles to play when it comes to the tile saw blade. It determines the lifespan of the blade and the smoothness of the cutting work as well. If you want a smooth finish and a pleasant look of the tiles, getting a blade with the lowest speed setting will help. Also, slow blades have an extended lifespan, so keep it in mind.

However, not all stones and tiles can be cut at a slower speed. In such cases, you will need a blade with a higher speed. It offers rough cuts but is essential to cut big blocks of rocks and tiles into more workable pieces. Also, its high-speed cutting capacity means you can finish off the job quicker.

Blade Diameter

The blade size or diameter actually refers to the disc size of the blade. The diameter is measured in either inches or millimeters. Ideally, most tile saw blades have a diameter between 4 inches to 12 inches.

The blade diameter is essential since it determines the actual cutting capacity of the blade. For instance, a tile saw blade of 8 inches would cut through 2 inches of material at ease. On the contrary, you will need 10 inches sized diamond blade that will cut up to 2.5 inches of thick material.

Bond Hardness

Bond hardness of the tile saw blades most usually refers to the rigidity of the bonding matrix. It keeps the diamond particles on the edges in the right place and prevents them from falling off of the blade. Sadly, you won’t find the bond hardness written on the product label.

However, you will get three variations for the hardness, hard, medium, and soft. Soft bond hardness of the diamond is used to cut hard metal with faster speed. It has a limited lifespan due to the softness of the bonding matrix.

On the other side, hard bondage is designed to work on soft tiles and works slowly too. Bit it enjoys an extended longevity thanks to the hard bonding matrix.

Mesh Size or Diamond Grit

The mesh size of the tile saw blade means the grit size of the diamond crystals on the edges. Tile cutting blades will feature diamond grits between 80 to 220 crystals. The range supports cutting materials of different hardness from brittle to tough ones.

The higher the mesh size number will be, the finer the cutting result will be. For instance, a smaller mesh size means coarse grit and an imperfect finish. On the contrary, larger grit mesh size refers to a finer grit and smooth finish on every cutting material.

However, a high number of diamond grit refers to the slow cutting, which at times might feel annoying. So, balance the grit size, cutting speed, and finish smoothness of the cutting material for the best results.

Segment Thickness

The cutting saw speed is mostly dependent on the thickness or width of the cutting segment. The segment thickness refers to the blade thickness in reality. A thin blade will heat later than the thicker blade and prevents chipping on the cutting material. When you want to cut had tiles and stones, get a thick segment for the blade.

And for cutting fragile materials, getting a thin blade segment will benefit you primarily.

Height of The Segment

Many people mistakenly believe that taller segment height contributes to the extended lifespan of the blade. The segment height becomes crucial only if you have to choose between two tile saw blades of similar specifications.

Hence, it is recommended that you don’t waste much time on the segment height of the blade. Instead, consider the cutting thickness, bond hardness, and other factors of the tiles saw blade.