No matter how great your chainsaw is, it won’t perform well if you don’t have the right blade. It is a necessary tool to get your things done nicely. Before purchasing a best circular saw blade, you must be aware that there are varieties of saw blades on the market having different features and functions. It may not be an easy task for you to choose the right blade amidst so many options. Here is a chart of 9 best circular saw blades to help you out. I hope our review will help you choose the right blade for your circular saw.
Table of Contents
- Best Circular Saw Blades – Reviews
- 1. Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade
- 2. DEWALT DW3106P5 10-Inch Miter / Table Saw Blades
- 3. Diabo by Freud D1060X 10″ Saw Blade
- 4. SKIL 75312 7-1/4-Inch Saw Blade
- 5. IRWIN 4935560 7-1/4-Inch Circular Saw Blade
- 6. DEWALT DW3128P5 12-Inch Miter Saw Blade
- 7. SKIL 79510C 7-Inch Turbo Rim Diamond Blade
- 8. Freud D1050X Diablo 10″ Saw Blade
- 9. Rockwell RW9282 4 1/2-Inch Compact Circular Saw Blade
- Best Circular Saw Blades Buying Guide
Best Circular Saw Blades – Reviews
1. Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade
The Freud D12100X is the most preferred high-quality saw blade that gives a clean cut. This 12 inch saw blade with teeth is flawless in cutting plywood, hardwood, and aluminum. Not only that, but it can also cut through metal and steel with minimum effort. Its ultra-thin kerf design is for minimizing material waste and giving you fast and effortless cuts.
It remains sharper for a long time. Thanks to its Tic-Hi density carbide wear. The blade is corrosion-resistant. Its parma Sheild nonstick coating guards this blade against heat and drumming also. The blade withstands all the extreme impact.
It features a sheer face grind, which helps you ensure a superior quality finish of your cut. Its sharp edge remains the same even after it’s continuous use for a very long time. It also includes a lower cut stabilizer vent to reduce noise and vibration and prevent sideways movement.
What is more, is that it has laser-cut heat expansion slots, that allow the blade to expand due to heat build-up. But you needn’t worry. This blade still can keep the cut more true and straighter.
I have been using this blade on my miter saw for years. It cuts like a hot knife through butter. It leaves zero-chip out, produces a finished cut. Therefore, I can say it worths my every penny, so will yours, I believe.
- Clean and smooth cut
- Laser-cut stabilizer to reduce noise and vibration
- Minimum material waste
- Not ideal for frequent use
2. DEWALT DW3106P5 10-Inch Miter / Table Saw Blades
You can achieve smooth and accurate cuts with the 10inch DEWALT combo blade pack every time. It includes thin kerf blades, one with 6o teeth for cross-cutting and the other with a 31-teeth for general purposes to reduce breakage.
This slim-kerf is also to offer quick and minimum excess of debris. There is a patent wedge shoulder that places additional steel in the back of every tip, and it is to maximize strength and achieve precision in every cut.
This 10-inch saw blade is ideal for cutting plywood, softwood, and hardwood. A balanced computer plate another feature of DW3106P5, which is to minimize vibration. It also gives you an elegant finish and absolute precision. It’s tough tungsten carbide maintains its sharp edge for a more extended period.
Get these blade packs for your table saw. You will get the value of your time and money.
- Combo blade pack
- Balanced computer plate to reduce noise
- Fine finish
- Tough tungsten carbide
- Sharp edge for a longer time
- Best for miter saws
3. Diabo by Freud D1060X 10″ Saw Blade
The Freud D1060X gives you a firm assurance of a smooth, fast, and precise cut. This blade is easy to operate, and its elegant design makes you feel comfortable while using it.
You can breeze through oak, pine, plywood easily, and it can be a go-to blade for trim carpenters. With the blade’s high tooth count, it minimizes grabbing of your workpiece, and it helps produce cut with little to no sanding. It can tackle even extreme impact; heat corrosion, gumming. Thanks to its carbide tips coating and hundred steel body. An assurance of durability, right?
Along with 60 Hi- AT3 teeth, D1060X features a 0.98-inch kerf designed to minimize material waste. It also helps you have firm control over the blade’s position to help you achieve accuracy and efficiency in your work.
You can get control over the blade with laser-cut teeth. The D1060X blade is also perfect for producing cross-cuts, and chip-free cuts in any type of wood or furniture. It includes a Perma- shield cutting to execute your cuts exquisitely and protect from heal, gumming, and corrosion.
- Thin laser cut kerf for fast, and clean cut
- Perma-Sheild non-stick coating
- Smooth finish
- Need to be examined before going far real cutting
4. SKIL 75312 7-1/4-Inch Saw Blade
If you strive for perfection in cutting, SKILL 75312 7-1\4 inch saw blade won’t weigh you down. Woodcutter’s top priority is to achieve clean and smooth cuts, and the SKILL 75312 comes with many excellent features to ensure it. It is a combo pack of a 40-teeth finish blade, and an 18-teeth ripping a cross-cutting blade. Carbide is used to make this saw blade durable and give a high degree of performance. Why carbide? It is because carbide teeth last up to 60X longer than those steel blades.
It includes compansion slots to ensure blade cuts straight and real. Apart from that, there is a clean anti-stick coating to withstand heat, friction, and binding. Its sharp cutting edges give assurance of fast and smooth cuts.
This blade pack is inexpensive but functions like much more expensive saw blades. You will have a great experience with their blade.
These are durable; ensure fast and smooth cuts; make a smooth and straight run; sharp cutting edges to make quick and finished cuts; can also withstand heat, friction, and binding.
What more could one ask? Right?
Share your experience.
- Best for smooth, and fast cuts
- Expansion slot
- Sharp edge
- Sharp carbide teeth often cause injuries
5. IRWIN 4935560 7-1/4-Inch Circular Saw Blade
IRWIN metal saw blade is one of the most befitting saw blades available on the market. This saw has some fantastic features that contribute to the advancement of your circular saw. It has metal-cutting carbide teeth that remain sharp for an extended period. This blade can cut through wood and plastic easily. IRWIN saw’s blade is perfect for cutting thin steel too.
And it is the best solution for the professional tool for their metal cutting needs. It doesn’t let the metal burn and also the paint.
It includes an anti-kickback tooth shoulder to make it safe for the users. It reduces dust and sparks for your protection. But you must wear a long sleeve shirt and put eye protection on. Don’t dare skip this; it is for safety while working with it.
Besides, this laser-cut blade features anti-vibration vents to prevent noise and wobbling and ensures straighter and accurate cuts.
- Can cut every type of metal easily
- Works for a long time
- Smooth and precise cut
- Comfortable for users
- Not so suitable for industrial use
6. DEWALT DW3128P5 12-Inch Miter Saw Blade
DEWALT always brings forth amazingly convenient tools and accessories, and the Dw3128p5 12inch circular saw blade pack is no exception. This blade is expensive, but you can find it giving you the most advantage worth the money you have spent. Plus, it gets well not only with circular saws but also with table saws and miter saws. This blade pack has a blade with 80 teeth and 1 with 32 teeth that add versatility to your work types.
It includes a thin kerf to ensure a smooth and accurate cut and reduce material wastage. There is also a balanced computer plate to reduce vibration and noise. Unfortunately, its teeth lack much carbide. But you don’t need to worry; it remains sharp for a long time. So, you don’t need to sharpen it many times.
This blade pack also comes with a carrying bag. And ensure easy portability and storage. It also assures you of durability and accuracy. Thanks to its edge shoulder design which places more steel behind each tip. Moreover, with anti-stick coating, it lessens friction and Gump.
We don’t like it because it depends on the stamping technique to cut things.
- Accurate cut
- Stamped blade and not laser cut
7. SKIL 79510C 7-Inch Turbo Rim Diamond Blade
Circular saws must have the right blade to give you the best absolute performance. And SKIL 79510c 7inch Turbo Rim diamond blade is one of these kinds. This blade is made especially for circular saws and grinders. You can cut through all types of concrete, brick, and general masonry.
The blade cuts pretty quickly and doesn’t show any signs of dulling or resistance.
It has a longer life in comparison to abrasive wheels. But what you have to keep in mind is that it is only for dry materials.
What may disappoint you is that it gathers much dust. But I have a way for you- you need to put a 20″ circular fan for about a behind where you will do your job. It will keep the cutting line clear, minimizing the dust getting sucked into the saw, and help you get your desired cuts.
In my opinion, for the price, it is a great deal. What do you say?
- Durable blade
- Give smooth and fast cutting
- Only fits for dry materials
8. Freud D1050X Diablo 10″ Saw Blade
Diablo D1050X saw blade is crowd-pleasing though it isn’t precisely such good blades around. This blade amazes consumers with its elegant design and is capable of easy utilization.
It can be your go-to tool if it is all about making rip and crosscut on wood and wood composites. This blade assures you of the smooth finish on wood and wood composites. It also functions for a table saw when one is needed to make rip and crosscuts. Its gullet is for effective ripping while closely-grouped teeth for smooth crosscuts.
What makes this blade durable is its micrograin titanium carbide construction. Its laser-cut heat expansion slots can enlarge to keep the cut accurate and straight. Moreover, laser-cut stabilizer vents trap noises and vibration, which keeps it cool and reduces blade wrap.
This blade provides long-lasting resistance. It is also a multi-purpose saw blade. So, it minimizes the time that you may need to change the blades between tasks. Thus, it saves your time. A great time savior, right?
- Stylish design
- Micrograin titanium carbide construction
- Laser-cut heat expansion slot
- Only suitable for cutting wood
9. Rockwell RW9282 4 1/2-Inch Compact Circular Saw Blade
If you have Rockwell RW9282 saw blade, you will get surprisingly impressive results at a low price. You can easily cut through wood, plastic, dry well, aluminum, and various metal with this 4’12-inch circular saw blade. This blade is of High-speed steel, which makes this blade capable of cutting so many materials. But you clean immediately after using it. Otherwise, it will get rust over time and will lose its sharpness. It includes a thin kerf, which helps to get a smooth cut.
This blade is the best fit for the RK3441K Rockwell compact circular saw. Also, it works on WORX*4.5″ saw. I used this blade with WORX to cut 3/4″ thick plexiglass.
Point to note, nowadays manufacturer uses metric measurement system also. So, you must be aware of the measurement of the center hole before buying.
- Can cut many different materials
- Low price
- Made from HSS
- Can get rust easily
Best Circular Saw Blades Buying Guide
If you expect the tidiest cuts and safest operations from a circular saw blade, you must not compromise with its features. It means there’s no scope of leaving any feature for getting another. Thus, our buying guideline on the circular saw blade will focus on these essential features that you simply can’t spare to ignore during the purchasing time.
The first thing comes first. You need to determine the blade size for the circular saw that fits perfectly with the saw. You can’t do in a smaller blade on a larger circular saw and vice versa. Sometimes you may be unsure about the blade size.
If such is the case, you may contact your dealer to know the blade specification. However, most blades will be between 10” to 12” for the circular saw. If it is a handheld circular saw, the blade size will reduce to 7”-10” for compatibility.
Types of The Saw
There are multiple types of circular saws, and each has a specific function. Hence, every circular saw works with a different kind of blade for various cutting and trimming chores. It would help if you reaffirmed that particular circular saw fits the blade correctly.
Some of the standard circular saw types are:
- Metal circular saw, or abrasive circular saw will usually need a 14” long and sturdy abrasive blade. It is made of either aluminum oxide or silicon carbide.
- The handheld circular saw uses a carbide-tipped blade with a length between 4-1/2” to 7-1/2” typically.
- Tile circular saws will use diamond-covered blades. The blade size varies between 7” to 10” mostly.
- The compound saws will use mostly 10” to 12” blades with carbide tipped to fit them.
Type of Work
Another important consideration for the circular saw blade buying is that you will mostly perform the type of work. It implies merely what type of cuts on what material you will be performing in general conditions.
It is crucial since a saw blade is best at tackling one or two types of materials only, and you don’t want to reduce the blade lifespan by using it on various materials.
- Dry-diamond blades are better for cutting tiles and in the masonry industry. Construction workers use the dry-diamond blade for kitchen, bathroom, and home tiles cutting jobs.
- If you want to cut the woodblocks across its grain, consider getting a blade with crosscutting capacity. These blades are equipped with numerous teeth for cutting through the tough, grainy part of the wood.
- If you want to rip through the grain of the wood, the blades with rip cut feature are your best buy. These blades have fewer teeth and work on brute strength to cut through the wood.
- You should get a metal cutting blade to cut metal. It is necessary since wood cutting blades will soon wear out if used to cut metals.
The kerf of a blade determines its thickness. Ideally, a thicker circular saw blade would last longer than thin blades. Thick kerfs also ensure that the blade edge doesn’t wear out sooner and requires sharpening after a long time.
However, thin kerfs mean the blade’s teeth will be sharper and cut through the materials faster and with enhanced smoothness.
Teeth Shape and Spacing
The shape and spacing of the teeth in a circular saw blade will mostly determine its durability and performance. Thicker teeth spacing means it is made for cutting large materials that need brute power. However, teeth with more acceptable sharpness and narrow spacing are made for cutting woods and small materials with smoothness.
Also, count the teeth number and inspect the quality to know what type of cutting the saw blade will perform effectively. Usually, most circular saw blades have either 40 teeth or 60 teeth count. Higher teeth count means the blade offers higher accuracy and sharpness.
You should focus on getting the circular saw blade with some coating. Most manufacturers will coat their saw blade to prevent rust and corrosion. Also, the layer works as a safeguard against abrasion and gum for convenience.
Hence, a blade with the coating will have an extended lifespan than a non-coated blade.
The arbor size is another crucial circular saw blade buying factor since it also determines the blade compatibility with the saw. The standard arbor size for a circular saw blade is 5/8”. Nonetheless, some larger saw may have an arbor size of 7/8” for the blade.
So, check the circular saw specification to know which arbor size of the blade fits your necessity.
Warranty and Durability
The purpose of getting a circular saw blade is to cut metals, wood, and concrete. These materials are known to take a toll on your saw blade. So, it will face wear and tear soon.
Thus, it is recommended that you get a blade with enhanced durability. The durability mainly comes from blade material, coating, and design. So, don’t compromise with these factors. Also, try to get a blade with a 1-year or 2-year warranty at least.