We all know that the chainsaws are an ideal tool for gardening, woodworking and forester based on their versatility and power. A well-crafted cord can help cut out various kinds of trees or hardwoods quickly. But unsatisfactory bar chains can lead to angled cuts rather than straight cuts. I have had this problem many times and will tell you the reasons for this. Chainsaws don’t cut straight: Chainsaws can cause many problems. The chain does not have sharpened edges and chain tension does not match that of the chain. The chain has a shorter thickness than the length of the grooves.
Table of Contents
- Your chain is dull on one side
- The chainsaw chain is not sharpened properly
- ● Reason 2. Chain is loose
- The edges of your bar are uneven
- The chainsaw chain is loose
- Causes of an uneven chain
- The chainsaw chain width is too thin
- ● Fix 1. How do you sharpen a chainsaw that cuts crooked
- The chainsaw bar’s groove is worn out
- How to prevent an uneven chain
- Why does my chainsaw not cut straight?
- How to fix an uneven bar
- ● Fix 3. Find the chain with the right thickness
- How do you fix a chainsaw that won’t cut straight?
- The chainsaw bar rails are uneven
- Sharpening the chainsaw chain properly
- ● Fix 4. Flip the groove over
- Why is my chainsaw cutting at an angle?
- Why does my saw not cut straight?
Your chain is dull on one side
It’s usually the reason a chainsaw pulls one direction. New or experienced chainsaw users may be facing similar problems.
The chainsaw chain is not sharpened properly
If your chain is not correctly sharpened, you may see teeth longer on either side. Unless your tooth has longer on either side it won’t be accurate. This is usually caused when the chain hits rock nails, dirt or rocks. A smashed blade can damage a chainsaw chain.
● Reason 2. Chain is loose
Occasionally, the chain fits too tightly in the bar and re-positions on the side to cut into a vertical position. The majority are now equipped with an adjustable tension mechanism that tightened the ropes around bars by pulling them up. Take care to adjust chain tension for a snug fit in the bars.
The edges of your bar are uneven
The chain is likely the reason why you are having this problem.
The chainsaw chain is loose
If the chainsaw chain fits tightly onto a chainsaw holder it rotates on its side to start cutting in the opposite direction. It is always important to keep the chains snugly in the bar.
Causes of an uneven chain
Imagine if we were ripping up an old tree and hitting the dirt. That’s all right. Getting into dirt, and hitting rocks, can be very damaging to your chain. I understand your thought, “duh”. When you hit a stone on a chain, your chain is likely a disaster. It’s quite evident. You might not have known this, but hitting a rock will probably damage both sides. One party may get the most of this damage. If you want a quick fix for an in-line chainsaw, you have to think about the fact that you have a grinder in it.
The chainsaw chain width is too thin
If you look around the chain you will notice that its drivers resemble toothed drivers that are placed in the groove. Usually, if the driver is shorter than the width of a bar groove, the chain can move. Then a chainsaw can move forward during a cutting.
● Fix 1. How do you sharpen a chainsaw that cuts crooked
The chain link must be checked before sharpening for damage or not. The cut teeth have a short slit on the edges that helps you measure them. The line sets the minimum length at which the cutter can be sharpened. By inspection of each cutter one can determine whether it has a different size. Whenever there are differences in your view you may want to sharpen the higher ones. To sharpen a chainsaw you should use the below method:
The chainsaw bar’s groove is worn out
Other times, the chain flops out of place, even if widths exceed the groove of the ring. During this procedure the bar’s grooves wear out after repeated use. The grooves width extends more than their originally intended length. It wiggles in its groove and therefore does not straighten up.
How to prevent an uneven chain
So once your chain has been repaired and sharpening, you want the same. How can we avoid chain damage? You also need to be careful not to hit rocks with the chains. Yes, this happens sometimes and most people would be less worried about the future. You should cut wood in ground by removing six inches of wood and rolling it out so that the cut can go from one side. If this is not possible or the log can no longer be transported, make sure the chainsaw is level to the ground to reduce contact or reduce damage.
Why does my chainsaw not cut straight?
When the chainsaw cuts at the angle instead of straight, the issue is certainly the guidebar or the chain assembly. The bar can have some gaps and some bar grooves are slanted. There are different reasons. It appears the bar and chain are not properly cared for. As a chainsaw professional there are 4 main causes of faulty chainsaws – namely:
How to fix an uneven bar
The edges should be filed so that it is flat. See above and see how this works. It must be done every time the machine is inspected for damage or malfunction. The image above shows PferDs edge sharpening tool. It is available on this site and I’m getting paid for it! Using an automatic filing machine is more effective in your bar than cutting it at an axe shop.
● Fix 3. Find the chain with the right thickness
Tell us that the chain is spinning at an intersection with grooves on the floor. Check the thickness and the grooves with the guide bars. You will be able to check your groove thickness by going to your manuals. Many chainsaw bar have chains that can be up to 5/8 inches thick. If the width of the chain is less than 5/8th inch, you have to put the correct chain on guide bar.
How do you fix a chainsaw that won’t cut straight?
Let us take note of the various reasons chainsaws don ‘t cut straight. Let’s talk about fixing it.
The chainsaw bar rails are uneven
Rail is the two edges of a bar groove. This supports both sides of the chain and helps in its verticality. Sometime, as a result of repeated usage, rails wear out. If it happens, either rail could be higher. The chain will rest on the rails in an angled position, resulting in an inclined cutting of the chain.
Sharpening the chainsaw chain properly
You should sharpen a chainsaw in a proper manner. Chain conditions are important for chainsaws. It is important to sharpen the chainsaw carefully. Then you must check the equal sharpening of all the teeth cutter and keep it in good order.
● Fix 4. Flip the groove over
When chain is not fully rolled, a proper thickness is achieved on its end. The guide bars probably have a worn down part. These sides are usually lower ones which touch wood. This side of the bar experiences the most fatigue and the strongest wear. This can be solved easily by flipping the bar and replacing the chain there. The lower bar has less wear on the top side. Try turning the chain sideward. You may find it wiggles a little, but it moves significantly higher down slant.
Why is my chainsaw cutting at an angle?
The unintentional wear on the guide bars in turn causes the chains to turn inversely instead of aligning with the bar thereby creating a vicious circle. The chainsaw will also be damaged because the guides were not properly installed or the shafts were worn.
Why does my saw not cut straight?
It can have many causes if your miter saw doesn’t cut straight. It’s warped, damaged or it’s wrongly installed. The curved beave gauge in this saw is defective. The Mitters are mis-aligned.