If you want to have strong and healthy plants and trees, you’ll always need to do some tree trimming. But tree trimming could be stressful and time-consuming without the right pole saw. A pole saw does not only delivers proper cutting, trimming, or pruning of your trees but also ensures your safety.
Many pole saw users have good experience operating the device, but only a few of them understand the usefulness of the string in it. The string is one of the most important parts of a pole saw and it needs to be restrung now and then to ensure efficient and effective performance.
If the string in a pole saw is damaged, all your efforts to trim or prune your trees will be wasted. A pole saw with a damaged string will never work properly. You need to restring your bad pole saw to ensure its effectiveness and efficiency. So, the real question is, do you know how to restring a pole saw? It’s good if you do, but if you don’t, it’s nothing bad. We’ve compiled a step-by-step guide to help you with the learning process.
Table of Contents
- Materials and Items Needed in the Process of Learning How to Restring a Pole Saw:
- How to Restring a Pole Saw (Step-by-Step Guidelines):
- Safety Tips/Precautions:
Materials and Items Needed in the Process of Learning How to Restring a Pole Saw:
You’ll need some essential items and material to restring your pole saw. These items and material include; Eyebolts, a long durable cord or one-fifteen, a pair of scissors or sharp knife, goggles for eye safety, and gloves for hand protection.
How to Restring a Pole Saw (Step-by-Step Guidelines):
Step 1: Put on your protective gear
The first step in the process of learning how to restring a pole saw is to use protective gear. Before you start working on your pole saw, you have to ensure that it doesn’t hurt you. That’s why you have to wear safety goggles and gloves for protection.
Step 2: Untying the old rope
The second step after wearing safety goggles and gloves is to untie the old rope and take it away. You have to be careful when you’re pulling the previous loop as it may loop over if you’re dealing with two pulleys. We recommend that you take the rope away using an ax or a screwdriver through pulleys, after which you can now untie the knot.
Step 3: Threading the end of the rope
This step involves repeating the same threading process for the third time. From the lower pulley, drag the string through the upper pulley. The strong should be inserted through the lower space if the upper pulley. It’s quite possible but a little bit hard to fasten the thick string through the tiny space. Now, your pole saw design determines whether you’re to thread the rope on the grommet or the anchor. Whichever way, a bowline or hitch will be handy as it helps to secure the end of the rope.
Step 4: Pulling through the rope
Following either an upward or downward movement, pull the top of the rope around the pulley. Also, the design of your pole saw determines where the first pulley would be located. Take, for instance, the first pulley that should be placed on the end of the lopper blade if the anchor eye is placed on the pole.
Step 5: Moving and securing the rope
In a continuous movement, run the top of the top from upward through the clip that’s placed in the highest pulley. Then, you have to repeat this process one more time, but now, from outside through the clip and in toward the cutting blade assembly.
Step 6: Securing the position of the new rope
Without having an anchor on the pole, you can prevent the rope from becoming loose and flapping by screwing an eye-bolt into the main pole. Then, knot it twice for extra protection. Threading the rope through the eye bolt is quite an easy step.
Step 7: Adjusting the size of the string
Using a plastic or wooden chuck as a grip, you can cut the rope to match your preference. The role can be cut to two or three feet, so it’ll be easier to get the size that matches your need. Don’t forget that you can easily operate a manual saw with a shorter string.
Step 8: Knotting the rope
Please do not forget to put a knot at the end of the rope if you’re using a cotton single polyester. In summary, remove the old strong and push in the new one through the face of the pole saw. Then, make a knot with the string that seamlessly suits the pole saw. After, lift the pole saw and try it out. Do not forget to make a tight knot! If you follow these few steps, you should know how to restring a pole saw.
The restringing process of a pole saw is quite easy and straightforward, but you need to adhere to some precautions to avoid injuries.
- Try to use a cord that fits into the groove of the pulley perfectly.
- We strongly recommend a polyester rope as it helps to reduce friction.
- A lot of people have been injured during pole saw restringing because they refuse to cover the blades. To avoid the same predicament, cover the blades before you begin the restringing process.
- Make use of a handle with a good grip to avoid any further accidents or injuries and also have a good pruning and trimming experience.
- Put on all the required safety wears like hand gloves and goggles for hand and eyes protection respectively.
- Know when to call a professional! Once the restringing process becomes more complicated, call an expert! Do not try restringing if you’re underage!
We hope you’re now familiar with the processes involved in restringing a pole saw. Each of the processes is quick, simple, and hassle-free. But remember to take note of the safety precautions and extra guidelines. Our guide on how to restring a pole saw will surely make you an expert at restringing in no time.
With a high-quality pole saw, your pruning, trimming, and the cutting job becomes easy. We’ve come to the end of this informative guide. We hope you were able to find good resources in your quest to know how to restring a pole saw. If you have any questions or comments about the article topic, don’t hesitate to contact us. Thanks!
- 10 Best Electric Pole Saws [Review & Buying Guide]
- 10 Best Cordless Pole Saws [Review & Buying Guide]
- 5 Best Gas Pole Saws [Review & Buying Guide]